Fusion Furnaces
ILS Fusion Furnaces
| Gas (LPG & NG) and Diesel (25 place, 50 place and 84 place) | |
| Construction | Cabinet of 5 mm zinc anneal steel lined with insulating firebrick. Backed with insulating fire brick. |
| Flame Supervision | LPG : Landis & Gyr LME 44 Flame Controller & U.V. Cell NG & Diesel : Landis & Gyr LFL1.635 & Flame Controllers |
| Temperature Control | Electronic, Automatic control 1200oC, Type “K” Thermocouple |
| Electrical Requirements | The furnace is fitted with a 10 Amp single phase cord and plug top. Electrical load: 5 Amps |
| Overall Dimensions Door open | 25 Place—1960mm high x 1320mm wide x 1450mm deep |
| 50 Place—1960mm high x 1790 mm wide x 1450mm deep | |
| Electrical (20/28 place; 25/36 place & 25/42 Place depending on crucible size) | |
| Construction | Cabinet of 2mm zinc anneal steel lined with insulating firebrick. Backed with Superwool insulation board. |
| 20/28 Place (Muffle #6) —300mm high x 460mm wide x 580mm deep | |
| Muffle Dimensions | 25/36 Place (Muffle #7) —300mm high x 600 mm wide x 580mm deep |
| 25/42 Place (Muffle #9) —370mm high x 680 mm wide x 670mm deep | |
| Heating elements | 12 x Silicon Carbide elements rated at 15kW/24kW/24kW, 3 Phase |
| Power supply is per a multi-tapped double wound transformer | |
| Door Operation | Pneumatic rising. Operated by foot control |
| Temperature Control | Electronic, Automatic control 1200oC, Type “K” Thermocouple. |
| High temperature alarm, over temperature controller | |
| 20/28 Place :15kW, 3 Phase | |
| Electrical Requirements | 25/36 Place: 24kW, 3 Phase |
| 25/42 Place: 24kW, 3 Phase | |
| Voltage is customized to destination country) | |
| 20/28 Place—1895mm high x 1120mm wide x 975mm deep | |
| Overall Dimensions Door Open | 25/36 Place—1895mm high x 1340 mm wide x 1020mm deep |
| 25/42 Place—1825mm high x 1410 mm wide x 1115mm deep | |
| HS Codes | Furnaces (Gas) 841710 & Associated Spares; |
| Furnaces (Electric) 841410 & Associated Spares 841490 | |
REQUEST A QUOTE
"*" indicates required fields